We believe this high pressure silicone grease to be the best solution to the issues associated with assembly and disassembly of ultrasonic tooling. The function of grease in the joint is to: 1. Fill the microscopic valleys in the surface of the tooling to improve acoustic transfer from one component to the next. 2. Remain in the joint so the metal of the two pieces of tooling do not become "clad" together by the action of the ultrasound and thus impossible to disassemble. The correct amount of grease to apply is that which completely coats both surfaces and not any more. Attempting to wipe off the grease from the tool with a grease-coated finger generally leaves about the right amount on the surfaces. Grease is never applied to the stud. Never use both grease and a polymer washer in the same joint. This high pressure silicone grease is recommended over other types of grease, especially polymer or petroleum greases, because of its resistance to high temperatures which may be present in some ultrasonic stack assemblies. This grease is packaged by the original manufacturer, Dow Corning, in a handy size packet (ampoule). We invite you to compare the size of this packet against the penny in the picture (not included) and against the packets supplied by others and then consider the value offered. MSDS shipped with product on request only. |
Could you do us a favor? If you want something and we don't have it on the site, like a replacement for a 502 or 802 converter or 200- or 400/800-style booster, please let us know by email. Thanks!    
Shipping to US addresses only at this time. Orders shipped to Illinois addresses will have Illinois sales tax added to taxable items. Paper warranty statement shipped with product supersedes any warranty statements made on web site. USA phone/fax 877-768-3892 www.tributek.biz - PO Box 8025 - Elburn IL 60119 USA All content is copyright (c) 2006-2008 www.tributek.biz division of www.tributek.com All rights reserved. Last updated 13 May 2008 
|